Swipe to see 15 photos | View Larger
So this is my 1997 Miata, as you can see I've modded this to be a fun beast, off-road and on road. The list of mods starts as such.
I've done a Paco moto lift, and put 26" tires with 14" steel rims on it for the height.
As for steel I've welded a 4 point roll bar, and put on front and rear bash bars.
There's a Manzo Catback exhaust installed
Strut tower support bar
New soft top
New plugs and wires
New clutch master cylinder and slave cylinder
New left cv axle and left upright
New shift boot
New paint and clear coat done 2 years ago
New belts waiting to be put in
Wrangler tires with new tread on them
There is as check engine light, but it is a P303 code for a misfiring cylinder, but if you listen to it you know its lying there's no misfire, it runs smoothly.
You might ask why I'm selling this car. I'm just needing the money from it, I still had big plans for this car. I have a Lincoln 3.0L V6 motor that I wanted to swap in and your welcome to take it with you, otherwise its going to the junkyard.
I also still have all the interior carpeting and trim that can be put back in, but lets be honest its just going to get dirty anyway, and sheet metal is a bit easier to clean.
I've got the original summer tires with loads of tread on them, ready to be put back in if you wish. Also the lift is reversible, its just a bolt in lift.
All of this can be yours for the low price of $6500, cash is preferred.
Call Ethan anytime at 435-572-0384, I'm at home almost always so just let me know what is a good time for you and we'll take a look at it together.
Disclaimer: This is a project car there are some quirks, but it runs absolutely amazing. Its one fun car, and I'm sad to see it go.
I've done a Paco moto lift, and put 26" tires with 14" steel rims on it for the height.
As for steel I've welded a 4 point roll bar, and put on front and rear bash bars.
There's a Manzo Catback exhaust installed
Strut tower support bar
New soft top
New plugs and wires
New clutch master cylinder and slave cylinder
New left cv axle and left upright
New shift boot
New paint and clear coat done 2 years ago
New belts waiting to be put in
Wrangler tires with new tread on them
There is as check engine light, but it is a P303 code for a misfiring cylinder, but if you listen to it you know its lying there's no misfire, it runs smoothly.
You might ask why I'm selling this car. I'm just needing the money from it, I still had big plans for this car. I have a Lincoln 3.0L V6 motor that I wanted to swap in and your welcome to take it with you, otherwise its going to the junkyard.
I also still have all the interior carpeting and trim that can be put back in, but lets be honest its just going to get dirty anyway, and sheet metal is a bit easier to clean.
I've got the original summer tires with loads of tread on them, ready to be put back in if you wish. Also the lift is reversible, its just a bolt in lift.
All of this can be yours for the low price of $6500, cash is preferred.
Call Ethan anytime at 435-572-0384, I'm at home almost always so just let me know what is a good time for you and we'll take a look at it together.
Disclaimer: This is a project car there are some quirks, but it runs absolutely amazing. Its one fun car, and I'm sad to see it go.
So this is my 1997 Miata, as you can see I've modded this to be a fun beast, off-road and on road. The list of mods starts as such.
I've done a Paco moto lift, and put 26" tires with 14" steel rims on it for the height.
As for steel I've welded a 4 point roll bar, and put on front and rear bash bars.
There's a Manzo Catback exhaust installed
Strut tower support bar
New soft top
New plugs and wires
New clutch master cylinder and slave cylinder
New left cv axle and left upright
New shift boot
New paint and clear coat done 2 years ago
New belts waiting to be put in
Wrangler tires with new tread on them
There is as check engine light, but it is a P303 code for a misfiring cylinder, but if you listen to it you know its lying there's no misfire, it runs smoothly.
You might ask why I'm selling this car. I'm just needing the money from it, I still had big plans for this car. I have a Lincoln 3.0L V6 motor that I wanted to swap in and your welcome to take it with you, otherwise its going to the junkyard.
I also still have all the interior carpeting and trim that can be put back in, but lets be honest its just going to get dirty anyway, and sheet metal is a bit easier to clean.
I've got the original summer tires with loads of tread on them, ready to be put back in if you wish. Also the lift is reversible, its just a bolt in lift.
All of this can be yours for the low price of $6500, cash is preferred.
Call Ethan anytime at 435-572-0384, I'm at home almost always so just let me know what is a good time for you and we'll take a look at it together.
Disclaimer: This is a project car there are some quirks, but it runs absolutely amazing. Its one fun car, and I'm sad to see it go.
I've done a Paco moto lift, and put 26" tires with 14" steel rims on it for the height.
As for steel I've welded a 4 point roll bar, and put on front and rear bash bars.
There's a Manzo Catback exhaust installed
Strut tower support bar
New soft top
New plugs and wires
New clutch master cylinder and slave cylinder
New left cv axle and left upright
New shift boot
New paint and clear coat done 2 years ago
New belts waiting to be put in
Wrangler tires with new tread on them
There is as check engine light, but it is a P303 code for a misfiring cylinder, but if you listen to it you know its lying there's no misfire, it runs smoothly.
You might ask why I'm selling this car. I'm just needing the money from it, I still had big plans for this car. I have a Lincoln 3.0L V6 motor that I wanted to swap in and your welcome to take it with you, otherwise its going to the junkyard.
I also still have all the interior carpeting and trim that can be put back in, but lets be honest its just going to get dirty anyway, and sheet metal is a bit easier to clean.
I've got the original summer tires with loads of tread on them, ready to be put back in if you wish. Also the lift is reversible, its just a bolt in lift.
All of this can be yours for the low price of $6500, cash is preferred.
Call Ethan anytime at 435-572-0384, I'm at home almost always so just let me know what is a good time for you and we'll take a look at it together.
Disclaimer: This is a project car there are some quirks, but it runs absolutely amazing. Its one fun car, and I'm sad to see it go.
Specifications
- Year: 1997
- Make: Mazda
- Model: MX-5
- Trim: MX-5
- Body: Convertible
- Mileage: 202,203
- VIN: JM1NA3539V0734568
- Title Type: Clean Title
- Exterior Color: Red
- Interior Color: Beige
- Transmission: Manual
- Liters: 1.8L
- Cylinders: 4
- Fuel Type: Gasoline
- Number of Doors: 2
- Exterior Condition: Very Good
- Interior Condition: Good
- Drive Type: RWD
- Ad Number 6989317
- Page Views 2494 Views
- Favorite of 52 People
- Member Since Apr 2006
Important Safety Tip
We work hard to protect you and this service from fraud. As with any classifieds service please be aware of the warning signs relative to buying and selling online. Concerned about this ad?
