For sale is my NA 300ZX. Runs and drives great with no mechanical issues that I'm aware of. The engine was rebuilt at 118280 miles. Rod bearings and main bearings replaced with ACL bearings. I've placed about 10k miles on the rebuild. The block and heads were also machined by Crankshaft Grinders in Salt Lake City. I can provide receipts for most if not all of the parts purchased and the machine work.

-Engine block was cleaned, decked and honed

-Crankshaft polished

-Heads cleaned and resurfaced

The car holds a clean title and was originally a California car. Heat and A/C both work, A/C was converted to R134 and had all of the o rings replaced in the AC system. Sway bar and steering rack bushings replaced with poly bushings.

-McLeod stage 1 clutch

-Concept Z chromoly flywheel

-ARP flywheel and pressure plate bolts

-350z clutch fork

-New clutch slave cylinder

-Nissan OEM throw out bearing and pilot bearing

-Rear main and front seals replaced during rebuild

-New OEM twin turbo oil pump

-Powertrix tension rods

-EGR deleted

-All coolant lines under the plenum deleted

-heater hoses replaced with silicone hoses

-New OEM Spark plugs

-All timing components were replaced with Nissan OEM parts when the engine was rebuilt (about 10k miles ago)

-OEM thermostat

-JDM tail lights and the JDM "300ZX middle piece".

-Tein Coilovers

-350z track edition rays wheels

-Brand new tires all season with maybe 700 miles of use

-One piece stainless steel clutch line

-Inland Empire one piece steel driveshaft

-New OEM input/output shaft seals

-unknown brand short shifter

-Apline double din with apple CarPlay/ Android Auto. The speakers were all replaced as well.

-Alpine amplifier w 10 inch planet audio sub

-New engine harness, alternator to trans harnessand updated PTU

• HKS catback exhaust.

-Basically every gasket was replaced when the engine was resealed with Nissan OEM gaskets

-All of the power steering hoses were replaced with silicone hoses. The pressure line going to the rack is a new Concept Z unit with AN fittings and insulated lines.

-Transmission mount was replaced when the engine came out

-New fan clutch

-Stillen front lip

A few cons:

-Brakes will need to be replaced

-Driver seat will need to be reupholstered or replaced.

-There is a dent on the passenger rear side quarter panel.

-The antenna is broken. I will include a new one free of charge (just haven't had time to replace)

-Ac works but when stopped will blow warm air. It will blow cold when moving again.

Price is obo. If you are looking for a NA Z in good shape for its age, this is the car. Will come with the OEM 300Zx wheels.

Can remove $1000 off the asking price without the rays wheels.

Thank you